Maxi 6000 is compounded from highly refined, paraffinic base, high, natural VI mineral oils. Fortified with the latest technological additive packages, these oils qualify for the smallest portable compressor to the largest air compressors used in heavy industry, and for all types of turbines. Be sure to refer to the manufacturer's nameplate on each and every compressor or turbine, or the manufacturer's operating manual for proper ISO grades.

Using a high-quality mineral oil-type lubricant with a unique additive package, Maxi 6000 is fully formulated, thermally stable, non-zinc containing, ashless additive system. This further qualifies this state-of-the-art oil for all hydraulic systems to meet and exceed manufacturer's specifications.

In addition, Maxi 6000 has a low pour point test, high flash point and oxidation stability test under American Society for Testing and Materials (ASTM) D-943. These oils far exceed the oxidation stability of any other compressor oil and equipment manufacturer's specifications for oxidation stability of only 1,000 to 1,200 hours of operation.

To further qualify Maxi 6000, they are fortified with the ingredients listed below. These ingredients are additional assurance that maximum lubrication and less friction will be encountered, and fewer costly repairs and, more importantly, less down time.

-  Rust, corrosion and oxidation inhibitors
-  Dispersant and demulsibility additives
-  Pour point depressant
-  Anti-foam and anti-wear (ashless) additives

Maxi 6000 meets and exceeds the following requirements:

-  Sperry Vickers I-286-S and M-2950-S
-  Cincinnati Milacron P-68, P-69 and P-70
-  Jeffery #87
-  US Steel 127 and 136
-  GM LH-04-1, LH-06-1 and LH-15-1
-  Denison HF-0, HF-1 and HF-2
-  Lee Morse 100-1
-  Ford M-6C32
-  BF Goodrich 0152
-  Military Specification MIL-L-17672C/D

Uses include:

-  Air compressors
-  Hydraulic systems
-  Turbines
-  Other equipment

Go to top

Hydramax

Hydramax industrial oils are premium quality and designed to provide maximum protection against oxidation, corrosion and wear. These oils are compounded from highly refined, high VI, paraffinic base oils and carefully selected additives including anti-wear, oxidation and corrosion inhibitors, and pour point and foam depressants.

Due to the proprietary chemistry used by ADMAX to producr Hydramax, this product has:

-  Good demulsibility
-  High oxidation resistance
-  Superior deposit formation
-  Is non-coking
-  Resistant to acid, moisture, rust, corrosion, chemicals, sludge, water, cold temperature and heat

Hydramax meets the performance requirements of:

-  Denison HF-0 and HF-2
-  Cincinnati Milacron P-69 and P-70
-  Sperry Vickers
-  API SA and SB motor oils

Hydramax industrial oils are not recommended in those applications where non-zinc-containing minerals are necessary.

Hydramax is also available with 1% Molybdenum Disulfide (MoS₂) in all ISO grades. Uses include:

-  High output hydraulic systems
-  Hydraulic pumps of all designs including high pressure, high-speed vane & gear type
-  Rotary-vane type compressors
-  Machine tools
-  Most oil circulating systems
-  Non-detergent motor oil applications

Go to top

Maxitorque

Maxitorque is a truly universal tractor transmission hydraulic fluid. This fluid is compounded from the highest VI, hydrocracked, paraffinic mineral oils and the latest, state-of-the-art technology in additives.

Maxitorque provides excellent extreme pressure (EP) protection for maximum gear life and capacity for wet brakes, power take-off and wet clutches, and excellent wet brake noise suppressant, along with excellent filterability characteristics.

In addition, the following additives and ingredients, which assure equipment owners and operators reduced down time and extended equipment life, have been included:

-  Seals swellant
-  Rust and oxidation inhibitors
-  Pour point depressants EP additives
-  Corrosion inhibitors
-  Depressant and demulsability additives

Maxitorque achieves results and meets the approval or recommendation of major manufacturers through extensive field service trial experiences. OEM acceptances include:

Approved tractor OEM:

-  John Deere RES 10060, J20A, J20B and Quatrol
-  Ford M2C134-D and MC86-C
-  Massey Ferguson M1135 and M1141
-  Kubota
-  White Farm Q-1826
-  Steiger

Recommended tractor OEM:

-  Ford M2C41-B, M2c48-B, M2C53-A, M2c134-A, M2c134-B and M2C86-B
-  Massey Ferguson M1110, M1127 and M1129-A
-  Case International JIC-145/MS-1210 and JIC-185/MS-11204
-  White Farm Q-1705, Q-1766 and Q-1802
-  Versatile
-  Landini
-  Fiat-Hesston

Approved transmission OEM:

DDAD Allison C-4

Recommended transmission OEM:

Caterpillar TO-2

Approved hydraulic OEM:

Denison HF0, HF1 and HF2

Recommended hydraulic OEM:

-  Sperry Vickers 1-286-S and M2950-S
-  Sung Straud Hydraulics
-  Plessey-Sundstrand

Uses include:

-  Farm & industrial tractors
-  Fork lifts & hydraulic systems
-  Hydrostatic drives
-  Front-end loaders
-  Differentials
-  Wet brakes/clutches
-  Transmissions
-  Power take-off
-  Construction equipment with common sump hydraulic systems

Go to top

Maxiway

Maxiway is specially formulated for the lubrication of machine tool ways and slides. This product eliminates stick-slip, or table chatter, by reducing friction between mating surfaces.

Where ways are heavily loaded, Maxiway provides high film strength and excellent extreme-pressure (EP) protection. These oils contain metal wetting, and adhesive and cohesive agents that enable formation of uniform films to resist squeezing from way surfaces while the machine is idle.

By using Maxiway, stick slip is prevented, way surface wear is minimized and service life is greatly extended. Maxiway Way Oil 32 is recommended for dual-purpose, hydraulic and way lubrication service.

Maxiway's other highlights include:

-  Demulsibility
-  EP protection
-  High film strength
-  Elimination of stick-slip
-  Cohesive and adhesive

Go to top

Maxitherm

Maxitherm is a mineral-type, heat transfer oil for use in secondary or indirect heating systems. This transfer oil is of premium quality with excellent oxidation stability, providing exceptional resistance to thermal decomposition.

Maxitherm is formulated to quickly absorb and transfer heat to the material or fluid required. Maxitherm's characteristics include:

-  Non-toxic
-  Low volatility
-  Non-corrosive
-  Open or closed systems
-  Seal compatible
-  Straight cut oils
-  Thermally stable
-  Absorb and transfer quickly
-  Low odor level

Maxitherm heat transfer oils feature low volatility to help eliminate vapor lock in circulating pumps, reducing the possibility of pump cavitation.

Uses include:

-  Open systems with expansion tank temperatures up to 365 degrees F
-  Closed systems with expansion tank temperatures up to 600 degrees F

Go to top