Perform (Item code ADC101) is a green fuel conditioner compounded from pure petroleum products and derivatives. This product is recommended for gasoline and diesel fuel (#1 and #2), propane and natural gas engines. Perform does not contain methanol alcohol, which will bring about early failure of internal carburetors, injector pumps or other vital engine parts.

This product was developed in a research laboratory and has been field proven for many years. Because it is compounded from pure petroleum products and derivatives, it is classified as a fuel conditioner, not a fuel additive, therefore, Perform becomes an integral part of the fuel and will not separate.

Perform can be used as a fuel conditioner and penetrating oil. As a fuel conditioner, mix 1 gallon to every 200 gallons of fuel. If the fuel is a natural gas or propane, it is recommended that a drip oiler or vaporizer be attached to the carburetor or intake manifold to disperse the product in proper amounts.

In addition, Perform can also be used as a flushing agent for internal combustion engines, hydraulic systems, air compressors and enclosed gear boxes. It should be mixed 50:50 with new oil, whether it is for a gear box, compressor, engine or hydraulic system, and run under a no load condition for approximately 30 minutes to one hour, depending on the equipment. The sump should then be drained and filled with new ADMAX lubricants.

Uses include:

-  Automobiles (trucks, industrial, off- or over-the-road)
-  Buses
-  Tractors and farm equipment
-  Railroad engines
-  Commercial equipment
-  Hydraulic systems
-  Fork lifts
-  Air compressors
-  Mining equipment
-  Stationary & marine engines
-  Recreational vehicles

Dieselmax

Dieselmax is a multi-functional diesel fuel conditioner that lubricates, cleans injectors, disperses water,
de-ices, prevents fuel gelling, boosts cetane and will dramatically improve the flowability of diesel fuel through fuel filters.

When Dieselmax is used at the recommended ratio of 1 gallon Dieselmax to 1,000 gallons of #2 diesel fuel, it will effectively prevent:

Fuel Gelling

Untreated diesel fuel, chilled below cloud point, will produce wax crystals that agglomerate until they completely gel the fuel. The diesel flow inprover contained in Dieselmax will chemically alter these wax crystals and prevent the fuel from gelling at 30 degrees to 40 degrees below normal gel point.

Filter Plugging

Untreated diesel fuel may still pump, but can contain enough small wax crystals to plug fuel filters in just two minutes of operation. The improvers contained in Dieselmax will dramatically improve the flowability through the fuel filters,

Wet Fuel

All diesel fuels contain some water, which plays a large role in related problems all year, but especially in the winter. No matter how good the flow improver chemistry, it cannot prevent freeze-ups and filter icing. A special de-icing compound contained in Dieselmax will effectively eliminate freeze-up and prevent damage to injector tips from large water droplets.

Injector Cleaning

Special cleaning compounds will effectively clean dirty injectors, and remove varnish and gum build-up inside both the pump and injectors, as well as the carbon deposits on the injector tips and piston crowns.

Lubricate

A special diesel pump lubricant, DPL, is added to Dieselmax to lubricate the entire fuel system. DPL is also fortified with additives to increase seal life and reduce seal leaking. With the use of low sulfur fuels, diesel engines have a tendency to run hotter due to the lack of lubrication. By using Dieselmax year-round, you can achieve maximum power, performance and economy in your diesel engines.